Merry Christmas! I made this video while on vacation. Everything you hear was produced by me. Download the studio version: soundcloud.com You will find more details about this production on SoundCloud. Songs in this arrangement are as follows: 1. Silent Night 2. Oh Come All Ye Faithful 3. Jingle Bells 4. Angels We Have Heard On High 5. Joy To The World The snowflakes were from a random video on YouTube. I just downloaded the video and keyed out the black background, and placed it on the foreground of the video clips.
Sorry for the poor image, done on my phone, but its to show you how easy it is to fix, read for details below. ----------------------------------------------------------------- The flashing blue LED and loss of sound on the Alesis M1 powered monitor is caused by failure of capacitor C8 (220uF, 35V) on the power supply board. It dries up due to its proximity to resistor R4 (47K, 2 W) which gets very hot. This is a design fault. Procedure: Remove the power supply board (4 corner screws and 2 mains connector screws) and disconnect the two plugs. Carefully desolder C8 and replace it. Its value is not extremely critical (220 to 470 uF will do) but it should be a 105 deg. type, preferably at 50V. Remove R4 and replace it with a similar resistor with its leads bent so that it is nowhere near C8, otherwise the fault will return. One end may be connected to one of the existing R4 solder pads (furthest from rear of board), and the other to the top end of resistor R3. Check that you have connected it correctly by inspecting the PCB tracks. It was recommend to us to replace C35 (1uf/50v). We did not do this, and can not see what advantage it has.. !!! Replace the board and all screws and plugs before testing.!!! IN THIS VIDEO WE ONLY REPLACED C8 that was all that was needed. we pushed the existing C4 away from the new C8 capacitor in both speakers . It was an easy fix. If you know how to solder and de-solder, you can do this. I could have done this as a newbie, but my brother is more <b>...</b>
SOUNDS QUIETER on here just a quick vid from my new iPhone cause I can't upload from my pc anymore idk y it just doesn't let me. these are my alesis m1 active mk2's with barbers adiago for strings playing. Sorry it sounds funny at points i accidentally put my hand over the microphone :D thanks Simon.
